Description
RF Flexible Screw Pumps Application
The RF pump is a flexible impeller pump. Due to the design, these pumps are reversible, self-priming and can suck from a maximum height of 5 meters. This type of pump is designed to pump products of both low and high viscosity as well as products containing particles or gases.
The main applications are transfer of dairy products (Milk Transfer Processing), edible oils, wine applications and beverages in general.
Operating principle
RF Flexible Screw Pumps Design and features
- Bare shaft or close-coupled construction.
- Reversible and self-priming pump.
- Machined investment casting casing.
- Double flat drive of the impeller.
- External single mechanical seal.
- Easy maintenance.
Materials:
Steel parts in contact with the produ: Stainless steel AISI 316L (1.4404)
Other steel parts: Stainless steel AISI 304 (1.4301)
Lantern and bearing support: GG-22
Impeller: CR (Neoprene)
Gaskets in contact with the product: NBR
Mechanical seal:
Rotary part: Carbon (C)
Stationary part: Ceramic (Cer)
Gasket: NBR
Surface finish:
Internal: Bright polish Ra<0,8 μm
External: Matt
Connections:
- DIN 11851p
- CLAMP
- SMS
(other connections available on request)
RF Esnek Pervaneli Pompa Uygulama
RF Pompası, esnek pervaneli pompadır. Tasarım gereği, bu pompalar tersine çevrilebilir, kendinden emişli olabilir ve maksimum 5 metre yükseklikten emebilir.
Bu tür pompalar hem düşük hem de yüksek viskoziteli ürünlerin yanı sıra parçacıklar veya gazlar içeren ürünler pompalamak için tasarlanmıştır.
Kullanıldığı başlıca uygulamalar süt ürünleri, yenilebilir yağlar, şarap ve içeceklerin genel olarak aktarılmasıdır.
Çalışma Prensibi
Pompa gövdesinin eksantrik şekli nedeniyle emiş tarafında kanatlar arasındaki hacmi büyüten bir vakum oluşur ve bu da ürünün emilmesine neden olur.
Rotorun dönmesiyle, ürün emme tarafından çıkış tarafına taşınıyor. Pompa gövdesinin eksantrik şekli nedeniyle tahliye tarafında kanatlar bükülerek aralarındaki hacmi azaltır ve ürünün tahliyesine neden olur.
RF Esnek Pervaneli Pompa Tasarım ve Özellikler
- Çıplak şaft veya birbirine yakın yapı.
- Tersinir ve kendinden emişli pompa.
- İşlenmiş hassas döküm kasa.
- Pervanenin çift düz tahriki.
- Harici tek mekanik salmastra.
- Kolay bakım.
Malzemeler:
Ürünle temas eden çelik parçalar: Paslanmaz çelik AISI 316L (1.4404)
Diğer çelik parçalar: Paslanmaz çelik AISI 304 (1.4301)
Fener ve yatak desteği: GG-22
Çark: CR (Neopren)
Ürünle temas halindeki contalar: NBR
Mekanik mühür:
Döner parça: Karbon (C)
Sabit parça: Seramik (Cer)
Conta: NBR
Yüzey:
Dahili Parlak cila: Ra<0,8 μm
Dış: Mat
Bağlantılar:
- DIN 11851
- KELEPÇE
- SMS
(istek üzerine diğer bağlantılar mevcuttur)
Operating limits:
Maximum flow: 28 m³/h 132 US GPM
Maximum working pressure*: 2 – 4 bar 29 – 58 PSI
Maximum working temperature: +80°C 176°F
Maximum speed: 1450 rpm
*depending on the model
Motor
- 3 phase induction motor with B14 flange and B3 legs, in compliance with the IEC standard,
- 4 poles = 1500/1800 rpm, efficiency class according to EC regulation, IP 55 protection and F-class insulation.
3 phases, 50 Hz, 230 V Δ / 400 V Υ, ≤ 4 kW
3 phases, 50 Hz, 400 V Δ / 690 V Υ, ≥ 5,5 kW
Options
- SiC/SiC or SiC/C mechanical seals.
- Food-grade neoprene impeller (BfR).
- Other types of connections.
- Motors with other protections.
- 1000 rpm motors.
- Electric panel with 10 m cable.
- Stainless steel trolley.